Extension Lead Keeps Tripping - UK Electrical Help

If an extension lead keeps tripping the breaker or RCD, it usually means the circuit is overloaded or there is a fault with the lead or connected appliances.

If you’re unsure where the fault is, using a simple Socket tester can quickly help identify whether the issue is with the socket, appliance, or wiring.

Common Reasons Extension Leads Trip

Extension leads are a common source of overloads.

Too many appliances connected
Faulty extension lead
Damaged plugs or cables
High-power appliances used together

Safe Checks You Can Carry Out

You can safely isolate the cause by reducing load.

Unplug all appliances from the lead
Try the lead in another socket
Inspect the lead and plug for damage
Use a Socket tester to quickly confirm whether the socket is wired correctly — this can immediately rule out common faults without needing to remove the socket.

If the extension lead continues to become hot during normal use, it should be replaced.

If you’re comfortable carrying out basic checks, using a simple tester can help quickly identify whether the fault is with the socket, appliance, or wiring.

Before calling an electrician, many common electrical faults can be quickly identified using a few simple tools at home. These are the same types of testers electricians use to diagnose problems safely.

Recommended Tools

If you’re confident carrying out basic checks, these tools can help identify electrical faults safely:

Socket tester – quickly shows if the socket is wired correctly and safe to use
Multimeter – helps check voltage, continuity, and identify faults
Voltage tester pen – detects live wires instantly without contact
Surge protected extension lead – provides safer power distribution and helps protect appliances from electrical faults and overloads

For a full list of tools you can use, see our guide on best electrical tools for homeowners.

Using these tools can help you identify the problem in minutes and avoid unnecessary call-out costs.

Many homeowners use a simple socket tester first before deciding whether an electrician is needed.

These tools are widely available online and can be useful for basic fault finding in the home.

When to Call an Electrician

Tripping that occurs without the extension lead indicates a deeper issue.

Tripping happens with the lead removed
Multiple extension leads cause trips
The socket becomes warm

Need an Electrician?

If this issue keeps happening or you’re unsure what’s causing it, a qualified electrician can safely diagnose and fix the problem. Electrical faults can worsen over time, so it’s best to get professional advice rather than risk damage or injury.

UK Electrical Safety Advice

Electrical faults can be dangerous. If you are unsure, always seek advice from a qualified electrician. This guidance is for general information only and does not replace a professional inspection.
For general guidance on household electrics, see our electrical advice for UK homes.